info@x-air.in Bangalore, India · Est. 1993
Technical Specifications

Powered Hang Gliders

← Back to product
Performance 05 / 08

A powered hang glider (including foot-launched units and motorized trikes) achieves performance that depends on its power plant, wing structure, and all-up weight.

Power and Thrust Requirements

  • Minimum Power: A flexible Rogallo wing hang glider needs at least 6 hp (4 kW) at the prop shaft and roughly 45 lbf (200 N) of thrust to maintain level flight.
  • Foot-Launched / Nano-Light Motors: Small backpack or harness-mounted engines use a few to over 10 horsepower to assist with flat-ground takeoffs and powered soaring.
  • Trike Engines: Powered hang glider trikes typically utilize engines ranging from 25 hp to 100 hp:
  • Rotax 503 (2-stroke, ~50 hp)
  • Rotax 582 (2-stroke, ~64.4 hp, generating 15 L/h fuel consumption)
  • Rotax 912 ULS (4-stroke, 100 hp)
  • Jabiru 2200 (4-stroke, 85 hp)

Flight Performance Metrics (Example: Heavy-Duty Cross-Country Trike like the Voyager or Albatross Cruiser)

  • Cruising Speed: 80 to 100 km/h (up to 120 km/h max speed)
  • Stall Speed: 50 to 55 km/h
  • Rate of Climb: 3 to 4 m/s
  • Take-off Distance: Under 60 to 100 meters
  • Fuel Consumption: 11 to 15 liters per hour
  • Endurance & Range: Up to 4 hours of endurance and a range of roughly 350 km
  • Service Ceiling: 3,000 to 4,000 meters

Aerodynamic Efficiency Factors

  • Lift-to-Drag Ratio: Performance relies on maximizing the lift-to-drag ratio across the entire speed envelope rather than just top speed.
  • Induced vs. Parasitic Drag: Slower speeds and thermalling increase induced drag (controlled via wingspan and sail design), while high-speed flight is limited by parasitic drag from struts, wires, and the pilot/trike chassis. Double-surface wings and variable geometry (VG) systems improve high-speed glide performance at the cost of heavier turning response.